UHF radio transmitter suggestion

[mark1st.john]

Hi, here are some possible options:

Long Range External Radio Kit

https://somsurveyinstruments.co.za/buy-now/long-range-solutions

Long Range External UHF 450 MHz Radio Kit Offering

Received an e-mail from E38 Survey Solutions, a reseller of Emlid gear. They are offering a Long Range External UHF 450 MHz Radio Kit for use with Emlid Reach RS2+ and Emlid Reach R3. Seems like it should also work with the RS2 receiver as well I would think. I know in the past there has been questions regarding external radios for use with the Emlid receivers. This Kit includes: External UHF Radio and High Gain Antenna Communication Cable for Reach RS2+ or Reach RS3 Power cable with all…

2w Uhf Radio on Reach M2

hi emlid, i have successfully use 2w uhf radio in my m2 in Serial mode S1 port. i would like to ask which buad rates is best to use in serial mode

Reach RS+ tests with external UHF radio (450 MHz)

To collect cm-accurate data in the real-time, you need a reliable correction link between base and rover. With a set of Reach RS+, you can use built-in LoRa radio for RTK communication. This will work well for most applications on distances up to 8km (sometimes even up to 19km). In some cases, you might want to use other connectivity options of Reach RS to set up RTK link. For instance, if you send/receive RTCM3 corrections from RTK GNSS receiver of another manufacturer. With the good Inter…

Long Range UHF Radio for Emlid Reach