Let's see your DIY M2, LoRa, Rover Pole & Base setup!

[timd1971]

Post details too! I.e. external battery, antennas, cabling, enclosures, 3D printed enclosures, mounts & parts, etc.

This goes for M+ also!

Thanks!!! : )

[jp-drain-sol]

My M2 project, Trimble Base Station

First I want to thank Torriem of the Combine Forum for the initial research and Arduino Sketch for the 1008 inject. A huge thankyou to PotatoFarmer! He helped me understand/learn/utilize the Nano. He also modified Torriem’s sketch so that it only utilized the single serial port that a Nano has, skipping the whole softwareserial headache. He has been a big help in answering all my n00b questions. I also want to thank bide from this forum for his idea of using a Pelican box as a project box. D…

Here is the thread that I did some time ago about my M2 base station setup. Pictures and particulars are in there.

[EBE111057 (Bryan Enfinger)]

Here’s mine for static use. Receiver and battery in blue bag. I’ve since changed antennas to Harxon GNSS 500 as they are in NGS’s calibrated list for post processing. I’ve got two LoRa radios but I haven’t had the time to experiment with them due to my back issues.

[vgo195]

Very convenient and i put the rest in a bag. It is not whether proof but i can live with that…!

[EBE111057 (Bryan Enfinger)]

Yep, that is a cool mount for a tripod ! Looks like you made the length of the rod an even measurement for the ARP. I don’t work in the rain either !

[timd1971]

Stumbled across this. Seems for a few more bucks, might as well just get a RS2.

“New modular GNSS receiver Geobox ForaFIX” Новый модульный GNSS приемник Geobox ForaFIX

- YouTube

Geobox Fora Smart GNSS receiver with Reach M2 module. Installation Guide

[timd1971]

DIY Affordable GNSS L1/L2 (Emlid M2)

Hello everyone, I am Alisson and I live in Brazil, I would like to share my project with you. Basically the idea is to use the equipment kits recommended by Emlid, that is, 2 Emlid M2 modules + 2 Tallysman HC871 antennas + 2 LoRa Emlid radios + 2 batteries + cables. The cylinder-shaped box will be resistant to rain, and will have an on/off button and also a button to capture the coordinate through the camera trigger. It can easily be attached to a pole and, if necessary, you can also replace t…

[timd1971]

Check this project out by @jzeph89 !!! ; )

Building my own RTK for land Survey 90% in progress

[timd1971]

Another nice Emlid DIY!

ARMAR TU GPS GNSS RTK + ECONOMICO / HOW TO ASSEMBLE YOUR GPS GNSS RTK DOUBLE FREQUENCY + ECONOMY