4 questions about the Reach M2

[EBE111057 (Bryan Enfinger)]

Let's see your DIY M2, LoRa, Rover Pole & Base setup!

Yep, that is a cool mount for a tripod ! Looks like you made the length of the rod an even measurement for the ARP. I don’t work in the rain either !

Reach M2 w/ Mini-Survey Antenna Static/Rapid Static Testing Results

I recently occupied/observed two local NYHARN control monuments nearby to test the Reach M2’s accuracy/precision under ideal conditions. I simply wanted to know what this device is capable of different time occupations post processed utilizing the NYCORS base stations and to share the results here. The two monuments chosen were each occupied for a slightly over 2 hour duration (I purposely went over two hours to evaluate OPUS static processing also). I chose a couple of NY CORS stations at di…

M2 enclosure for Harxon antenna

I have mentioned in the past year how I was trying to come up with an enclosure for my M2 that would fit with my existing antenna. After kicking myself in the behind this spring, I finally finished it. It’s a homebrew solution, but it’s the most elegant I could come up with. Disclaimer: don’t take your M2 out of the stock case unless you’re comfortable with voiding your warranty. There is a definite possibility of killing the board or some of its components if you fiddle with it. The problem I…