RTK Explorer Help

Can you post your datasets and screenshots of your settings here ?

I am using data from a CORS database and the rinex are 2.11 gps and glonass, to the ublox I convert them into rinex 2.11 to be compatible. I made the mistake of not putting the base with RS2

the configuration you use is the same as the EMLID help, it does not explain in the case of rtkexplorer it is for the EMLID version

So everything works now?



go to the rtklibexplorer site, he has a run down of useing the ublox f9

1 Like

@tatiana.andreeva @gleb.gira SystemReport[1].zip (1.1 MB)

Hi Luis with RTKLIB suggested by Tracy you can get a Fixed solutions.

I can not get fixed solutions, something happens in the rinex of the new version. With RS + without any problem I can process

I try now and reply…

name longitude latitude elevation antenna height antenna type
CORD -64.470048266° -31.528434591° 746.846 0.092 TPSCR.G3*

Is it correct ?

the base is in a place free of obstructions and very few satellites are shown, in rechview 34

the base of the first file I uploaded

I got a fixed solution for 7 points and float for one but next time try to put more observation time…

can you explain me how to configure?

Yes of course , look at this link Post Processing Reach with Topcon Base Station - #17 by Zinou
and use Demo5 b33a.

1 Like

I always do the same for the configuration of the base, I don’t know what other parameter I will have wrong.

Ok I make a screenshots …



name longitude latitude elevation solution status
Poste -64.952968101 -31.685835321 1179.902 Fixed
Poste 30 -64.952968107 -31.685835298 1179.899 Fixed
Poste esquina -64.952968023 -31.685835635 1179.882 Fixed
Poste esquina -64.953155241 -31.686315821 1179.456 Fixed
Poste esquina -64.952770103 -31.686300714 1175.771 Fixed
Poste esquina -64.952763313 -31.685846961 1178.211 Fixed
Poste pl -64.954634946 -31.686447783 1195.251 Fixed
Mojn testigo -64.954730263 -31.686179312 1206.949 Fixed

Thank you @Zinou

This topic was automatically closed 100 days after the last reply. New replies are no longer allowed.