Rc Receiver and Navio2

[Loia94 (Alessandro Loiacono)]

Hi all. I have Turnigy 9x and i have to connect it to my Navio2, bud i don’t know how to do it and even which code to write( in the Navio2) to bind them… Any help? Really thanks! Here is the image of turnigy 9x

[dmitriy.ershov]

Hi Alessandro,

Welcome on forum!

Please take a look at the similar topics:

PPM encoder for RX

We bought a turnigy 9x rx/tx combo to use for the navio2 to create a quadcopter and were wondering how to connect everything together. From research it seems that we cannot directly connect the bundled receiver (turnigy 9x8c-V2) to the navio2 pins, and need an encoder. Since we are newbies to this, we just wanted to confirm that we need a ppm encoder for our tx/rx system to work. We are using a navio2 with a rpi3. We have a dji e305 propulsion system, and a generic frame bought online.

Turnigy 9x and RC receiver

Hi, I have received a Turnigy 9X transmitter from a friend, but he’s lost the receiver. I was wondering if there would be a compatible RC receiver that already has PPM output that I could buy, or if I should buy the original 9X receiver (https://hobbyking.com/en_us/turnigy-9x-2-4ghz-8ch-receiver-v2.html) + a ppm encoder (https://hobbyking.com/en_us/ppm-encoder-module-hkpilot-32.html). If I should buy the encoder, I’ve noticed both the encoder and the original 9x receiver have male pins… Do the…