Hello, I’m trying to access an old survey stored on the device captured using reachview 2. I’ve recently caught up with firmware and app updates and can’t find a way to access this survey.
I’ve tried:
Using the Emlid flow app,
Connecting to the Reach RS2 via IP Address
Connecting to the Reach RS2 via SSH protocol
Similar issue here:
Hi,
I’m currently faced with a corrupt survey file which was downloaded from the original reachview app. I have transferred to the new ReachView 3 app and can’t access any of the original data which I had on the original app. I don’t have access to the original app any longer so can’t go back and redownload my survey from the RS2+ rover. Is there a way to access this survey from the new app or by plugging the rover into a computer?
Device firmware 30, app version 8.3
Is this still possible?
1 Like
Hi,
This was the solution below and it worked for me!
Hi Cameron,
You still should be able to download the survey project from Reach Panel. To access Reach Panel, you need:
Connect your phone, tablet, or laptop to the same Wi-Fi network as Reach (or to reach:XX:XX if Reach is in hotspot mode).
Check Reach’s IP address in ReachView 3 app. If Reach is in the hotspot, it’ll be 192.168.42.1
Enter this IP address in any browser.
Please keep us posted on the results!
2 Likes
Hi Conor,
Does the solution that Cameron shared work for you?
1 Like