Reach RS 2, Firmware 27.1
After using the Reach RS + for over a year, I bought a Reach RS2 two months ago.
The device works extremely unstable and unreliable in some places, as it constantly crashes and reboots shortly after booting. It may boot 3 to 4 times before you finally get a result, but you have to be quick then. It takes half an hour or more to record 5 points. Sometimes the device beeps continuously during booting since the previous reset. Then only a manual restart will help. According to my observations, the behavior mainly occurs when the cell phone reception is not absolutely perfect .
I tried to see if the WiFi had an impact by turning on the access point on the Iphone. Sometimes it feels like an improvement, but mostly it doesn’t. I don’t now what to do now, especially since the device is completely new and I don’t use it much. But when I need it, I have to be able to rely on it because the project locations are far away from the office. Is it a software or a hardware issue. Should I return it to the dealer? What is confusing is that I’m the first one to report such an issue…
I’ve attached the logs of a mission from yesterday. You see 8 boots but there where more in reality!