Trimble FM750 & Emlid Reach RS+ with Ntrip Caster

[julia.shestakova]

Hi Caleb,

Just want to sum up the workflow and add a couple of notes.

As you have an available RTK subscription and 2 receivers, I see that the easiest way for you is to set your own base in Average Fix.

Then, you can simply work locally with your own base and rover and transmit corrections via Emlid Caster. In this case, all that you need is to provide both units with a stable Internet connection.

@caleb1

if i log into the old one i get about 13 plus up to 16 satellites on fendt display after rtk correction has been established vs the emlid one its struggling to see an avg of 10-12 max wondering if its how our emlid base is setup

Hmm, I am not sure which value is shown on the Fendt display: the number of satellites in view or the ones considered in calculations. So I think it’s better to check the number of satellites in the NMEA message directly.

I’ve also noticed that you use Reach Panel to operate Reach RS2. And I recommend you to try ReachView 3 mobile app instead. ReachView 3 contains a lot of new features and fixes. And we keep working on its improvement!