Reach RS2 and FDOT FPRN

From this document and this page it seems that it should work with no issue as they state to output RTCM 3 MSM4.

Standard formats include:
SINGLE BASELINE: RTCM 2.3, RTCM 3.1, CMR+, RTCM3 MSM4, RTCM3
VRS: RTCM 2.3, RTCM 3.1, CMR+, RTCM3 MSM4, RTCM3
MAX: RTCM 2.3, RTCM 3.1, CMR+
iMAX: RTCM 2.3, RTCM 3.1, CMR+, RTCM3 MSM4, RTCM3
FKP: RTCM 2.3.

There’s been questions about what types of RTCM messages the RS2 supports (that it would need at minimum MSM4) and there’s a list of supported input messages here. If you can verify on your end with the FDOT what messages they output, you might have a better idea if there should be an issue.

But of course, nothing would be better than an Emlid user from Florida that could answer with a quick yes or no. I’d test it but it requires registering for a (free) account with a 2-day delay before it can work, which might be even more since Florida just got pummeled.