LoRa Radio for 3rd party systems

[jp-drain-sol]

I got some more TTL to RS232 adapters in today so I can resume my testing this weekend.

I did find this was tried previously in this thread

Reach RS and LoRa 868/915 MHz radio

I took another shot at interrogating the radio for its settings and got something back this time. *Edit: [IMG_20180716_162732] I was using ascii this whole time then in the documentation it explicitly says its hex. I used RealTerm set up the Baud rate to 9600 [lorasettings] I sent the interrogation/read command (0xFF 0x4C 0xCF 0x52 0xA1 0x52 0xF0) and got this: HEX(responce) Meaning Preamble: 24 None Model Name: 31 30 31 48 101H FW versio…

I will have to build off his work and see where I can get.