How to mount the 3d anti-vibratoin mount print for the Navio

HEllo,

I did 3d - print the mount for the navio as described here:

So the rasberry pi mounting holes fit the ones ofthe upper part,
but how would you mount the lower part e.g. to the F450 frame?

There is holes in there but I was just wondering for what plantform those where intendend
or if i missed something.

Also I had tried to 3d print the files for the Reach enclsure / housing,
but e.g when using a printing service (3dhubs) it had told me “file too large” or some other error.
Thank you

Hi,

Holes on the platform are not designed for any particular platform. You can simply glue the bottom part to your frame with double sided tape.