Hi andrew!
Thank for your reply
my fisrt concern is if I can trigger the camera via USB.directly from Reach M+?
If not, what kind of cable I need to trigger a Sony a7r iii, and get events via HSA?
Answering and giving you a scope of objetives
I got GPS/GNSS recivers for PPK
I plan to use a Reach RS as base for RTK,
(Alternatively, I can use a Reach m+ with RDF900 for long range corrections,
but that not be adressed at this step)
I don’t belive tat NTRIP could be a solution in an airplane, or in my area (NE of Argentina),
Te central idea is mount everithing in a plane (not a drone),
so there is no autopilot in the project.
I got a Reach M+.
The consecutive planning steps in my developement are:
- wire everiting
- test triggering from Reach M+
- test events from HSA.
- Integrate Hardware in a Pod appropiated for airplanes
- Air test
- Air test with RTK corrections
- Software development of a tablet application with:
- Logging data in the Reach M+ and RTK fix (if available)
- get Location from Reach M+ (mock?)
- Status of the location (FIxed or Autonomous for PPK)
- Show pre loaded fligth plan to assist pilot
- Show camera status (if I can wire via USB, but this is not mandatory)
- Start and stop triggering based on location (triggering will be time based in te first developements)
This is for avoid photos during turns - export logged data
In a second version of the app I wish to get IMU data from Reac M+, so the final output could be position and attitude of the camera in each photo event