HELP!how can i do the Quickstart?

[supengcc]

i bought 2 reach, but now i dont know how to connect them.
i want to know, when i act with the Quickstart, how to connect them?

Q1: do i need 2 3DR radio for each reach for a long distance application?
Q2:when i do the steps with the Quickstart, how to connect the 2 reach?
if one reach connected to my laptop with USB and another powered by a power bank?
Or the two reach are connected to my laptop at the same time when i do the Quickstart

[egor.fedorov]

Hello,

See these links:

Questions about long distance communication

Communication between base and rover is not necessary, so radios are not necessary. You just collect the log files afterward and post-process them (usually called PPK). However if you want real-time results (for RTK), then you need real-time communication. Usually that is done with radios (like 3DR), but it could be WiFi, or cellular, etc.

Getting Started

Jim, TB_RTK & bide, Thank you very much for your guidance and your patience. I think the pairing is complete. Is there anything else I need to do? Pairing of REACH RS Base with iPhone. Try outside the house in the park. Off iPhone wifi and hotspot. Power on Reach RS Base, iPhone wifi (in Settings) to select Reach RS as hotspot, reach:99:12, iPhone browser, type reach.local, enter. EMLID Status window is accessed. Check the signal to noise ratio. Red bars means not enough, green is enough. Ta…

[supengcc]

now i have understood how to use it, really thank u for your help!