External standalone integration onto Yuneec H520

[michaelL (Michael Lambert)]

I custom made a module using 3M Industrial Hook and Loop that is not the most professional, but it works like a charm. You then use GeoSetter to marry the GNSS track from the PPK. I have never tried a video and have never seen a track georeferenced video, but I am sure it’s out there.

Yuneec with Emlid PPK Mapping

UAV mapping with a Yuneec H520, Emlid Reach RS+ base station and Emlid Reach M+ custom mount on the H520. While I have over 1,000 maps most of them have been with a Phantom 4 Professional with a very similar setup. This post is to show the diversity of the Emlid equipment and how a little ingenuity can create great results. [image] This project started several months ago and I have flown approximately 50 missions with the set up and can see that it is every bit as good as my other missions. …