Hi Sam,
Sure! You can check this support tip on how to set the base.
It all comes down to the level of accuracy you need:
-
Relative: you don’t need to know the precise base coordinates. You can simply place the base and use Average Single without any corrections.
-
Absolute: knowing the precise location of the base is necessary. The simplest option is to place the base on a known point and manually enter its coordinates.
If you don’t have a known point, you can use Average Fix. You’ll need to set it up to receive corrections from a second unit or an NTRIP. Once the base position has been averaged, you can turn off the Corrections Input.