What is the vertical CRS of corrected elevation data from Studio Stop & Go?

[merryna.anggriani]

@emory.wellman If you’d like to use the local coordinate (Florida West) and the Geoid12B. You can import the resulting CSV from Stop&Go and import it in Emlid Flow with a project in this local coordinate. I share our support tip regarding this:

How to obtain projected coordinates using Stop & Go?

All our previous posts on much-discussed topics were mainly tips, but this one is a real trick! If you have ever used Stop & Go with Emlid Flow (formerly known as ReachView 3) in Emlid Studio, you know the output is precise geographic coordinates. But is there a way to obtain coordinates in your local projection? No doubt, check the steps below: Download the corrected CSV from Emlid Studio. The coordinates in the CSV are in the datum of your base. Create a project in Emlid Flow in a local proj…

I am not really sure about the setting in Pix4DMatic, but by doing this procedure, we will ensure that the coordinates in the CSV are aligned with the setting on Pix4DMatic.