Using Reach RS+ withTrimble R10 as Base and Rover pair

The only way you’ll get this setup to work with real-time corrections is to get hold of a Trimble or PDL radio and connect it via serial cable to the Reach RS acting as a rover. Setup your Trimble as the base sending it’s corrections out via it’s radio using RTCM.

You will not be able to do the reverse and have the Reach RS acting as the base and the Trimble as the rover. Myself and others have been trying to do just that, as discussed in another thread with no success.

So if you want / need real-time correction, your real options are (a) buy a new or secondhand compatible radio for the Reach or (b) buy another Reach. Whichever option is cheaper or more useful for you long term.

1 Like