Second connector for Ethernet

Reach Module / M+ / M2 Hardware integration
1

I have a Reach RS up and running at rooftop as base station, recently have a frequent wifi disconnection as the wifi environment being confused with others. I have tried to Ethernet connection through USB connector and experiencing stable connection to my LAN. But I am concerning about waterproof issue on this little tiny connector and thinking RS232 to Ethernet adapter through second connector.
Is there someone have used this way and any recommendation for adapter?

My ReachView version is 2.16.2

3

long_USB-OTG_cable
long_USB-OTG_cable.jpg1000×750 63.3 KB

(plug this long USB-OTG cable into Reach RS)

:heavy_plus_sign:

silicone_sealant
(use sealant around connector on your Reach RS)

:heavy_plus_sign:

pelican_case
pelican_case.jpg600×600 47.7 KB

(cut small notches for cables to enter. also apply sealant here.)

:heavy_plus_sign:

usb-ethernet
usb-ethernet.jpg2164×1040 476 KB

(put this USB-Ethernet adapter in the box)

:heavy_plus_sign:

ethernet_cable
ethernet_cable.jpg789×644 52 KB

(this cable will leave the box and go to your network

1 Like
5

This topic was automatically closed 100 days after the last reply. New replies are no longer allowed.