Hi Fabian,
I have post-processed your data with the result of 69.5% of fix. Just set your elevation mask for 30 degrees and enable the SNR mask on 35 for both receivers. I’ll attach the screenshot.
However, please note that the baseline you’re using much exceeds the recommended one for post-processing with Reach RS+ (it’s 30 km only). I believe you can use the RMS shown in the RTKPlot as a general reference for an accuracy level, however, please note that the solution can hardly be accurate enough.
Would it be possible to find a closer mount point of your CORS?
You can also process the data with the NRCAN PPP service. Nevertheless, according to our user’s test, the accuracy it’s possible to achieve is up to 15-30 cm only.
You’re correct. You’d need to insert the found base position in the Base Station field of the Positions tab in the RTKPost.
