RTK Corrections and Position Output on UART Reach M

Reach Module / M+ / M2 Hardware integration
1

I would like to use a Reach M and provide my own link for the corrections. Is it possible to communicate RTK corrections and position output over the same UART?

The wireless link is already attached to another CPU but that CPU needs the position output of the receiver too. Is it possible to use one interface for corrections and position or am I going to need to use an alternate interface like USB for position and UART for corrections?

2

Use two interfaces, one for correction and the other streaming position.

3

This topic was automatically closed 100 days after the last reply. New replies are no longer allowed.