RS3 base with Trimble R10 rover

[Wombo]

Related posts re NTRIP from a couple of other R10 users:

RS2+ as Ntrip base for Trimble

Hi, I am trying to use and RS2+ as a RTK base station for some Trimble Receivers (R2,R10). I have got this working well except for the Galileo system. RTCM Messages I am sending from the RS2+ are 1006,1074,1084,1094,1124,1230,1008 and 1033. Message 1094 is the Galileo message, and I have used snip to understand what is different about the Emlid 1094 message and other services I have access to. The only difference is that the codes L1C and L7Q for Emlid and L1x and L5x for others Is it possibl…

Emlid caster, Rs2 messages Rtcm

Why message 1230 is not sent via Emlid caster, although this message is enabled in Base settings in Rs2? I check received packets from caster using Ntrip checker. Ntrip checker shows all messages that are enabled in base settings, except 1230. I also check the stream from the Cors system, 1230 is also enabled in their stream and ntrip checker sees it. What could be the problem and how to solve it? Due to the fact that this message does not reach the rover, some Gnss receivers do not receive …