RS2 post processing error

Reach RS2 / RS2+ RTK / PPK configuration
1

Hi Everyone,

Came across an issue with the postprocessing of our RS2 log file acquired yesterday. The system was a static base station with an incoming NTRIP correction. For about 1 hr period after running RTKlib the quality goes from 1 to 5 and then towards the end of the collection period returns to quality 1.

Screen Shot 2021-07-16 at 11.31.03 AM
Screen Shot 2021-07-16 at 11.31.03 AM3480×1792 877 KB
Screen Shot 2021-07-16 at 11.33.17 AM
Screen Shot 2021-07-16 at 11.33.17 AM2016×1162 488 KB
Screen Shot 2021-07-16 at 11.33.38 AM
Screen Shot 2021-07-16 at 11.33.38 AM2028×1100 374 KB
The postprocessing was done with base data from one of the NRCan’s Active Control Stations with the quick clock and ephemeris corrections.
The RS2 was was not disturbed during its collection. Has anyone seen this type of error before?

2

Are you sure you have badge data from that period ?

3

Turns out the NRCan base station data had some problems during that period. Changing to a different station provided a fix throughout the observation period.

3 Likes