Hi everyone, Im trying to link my RS2+ receivers to the Sontek M9 ACDP. Ive read some posts about it but I was wondering if anyone has a complete step by step method or offer me some guidance cause im kinda of lost trying to connect them. From what ive read integration between both systems shouldnt be a problem. Any help would be greatly appreciated!
Hi Josue,
We haven’t tested this SonTek ADCP with our receivers, so I can’t provide a step-by-step description of the integration. But as the ADCP has an RS-232 port for GNSS input, it should work with Reach by streaming the position via Serial.
Besides, I know that some of our users successfully used this integration, so maybe someone else could chime in to share some further experience.
1 Like
Thank you for your response Kornel.
2 Likes
Hi ! I am in the same situation as you, I am trying to connect my RS2+ receivers to the Sontek M9 ACDP. So I don’t know if you were able to do this, if so, please share with me if possible the solution and the steps that can help me do it too.
help from you or other people will be of great use to us. THANKS