Hi there,
My reach rs 2 doesn’t start. The lights of power continuously blinks but don’t get started. Can i repair at how. It seems there’s the problem in firmware so how can i repair it?
You could try to flash the firmware using Emlid’s flashing tool with a computer and a USB cable.
A word of warning: Flashing the firmware will clean out the data storage, so any of your data on the device will be lost.
Before you try that, it may be worth it to hold the power button until it turns off. Then let the device charge overnight. Maybe it will boot up with a full battery charge.
1 Like
Hi Bibhusan,
Welcome to the forum.
I agree with Ceith, please try to charge the device overnight. If it doesn’t help, please let me know the state of the network LED. Is it white or blue?
This topic was automatically closed 100 days after the last reply. New replies are no longer allowed.