Reachview wifi ntrip

[tatiana.andreeva]

Hi @srv.islamabdallah,

Check this comment, it should help:

Reach M+ and NTRIP CASTER

tj YES, i was able to set up my own base in rtk2go.com To set up your base to transmit RTCm in rtk2go.com make sure your phone has an internet connection. Connect your Rs+ (BASE) to your phone or wifi network. 2.Open your reachview App Set your RTK parameters. BASE Mode (NTRIP) Address: rtk2go.com, PORT:2101, Password: BETATEST, MountPoint: Your Chosen Name . Note: Password is only entered once at 1st time connection only. On second time. Rtk2go will automatically recognize it. Check your R…