ReachView, RS+ cable connection

[buchi.andrian (Andrian Buchi)]

Hi,

Is there any way to access ReachView on RS+ through wire (USB or RS232)? I have found multiple support and solutions for the RS version, using Ethernet over USB. But not for RS+…

Thanks!

[andrew.yushkevich]

We don’t officially support it but you can find some useful threads with the same workaround on the forum.
Maybe this one will be useful:

Change Settings of Emlid Reach RS+ By USB connection

To use the 9-pin connector to access ReachView would be very cumbersome and it is not a supported method. To use the USB connector to access ReachView is possible. I have done it many times. USB can be used in different ways. One is “serial over USB” which is not what you want. The other is “Ethernet over USB” and this is what you want. You should research how to do this type of thing with your particular operating system. Plug your Reach device into your computer with the USB cable. T…