Reach RS on vehicle


I know Reach RS was thought to be used as base station, but I’m thinking on using it on a moving vehicle. The vehicle won’t move fast (10-15 km/hour at most). Position will be corrected by post processing using RINEX from local GNSS network. 5-10 Hz measurements frequency will be needed.

Would Reach RS would work properly even in a moving vehicle or it should be used just as a base station?


Reach RS can be both base and rover, it will work properly on a moving vehicle.


Reach RS can go much faster then 10-15km/t :stuck_out_tongue_winking_eye:

But you wanna use hight rate like 10 or 14Hz if possible

1 Like


¡Really fast!

Thanks for the answer