Reach M+ hot shoe connect

Hi, I need integration reach M+ inside to my UAV. I need only time tag for each photo to PPK solution.
Camera (sony A6000) is trigered from USB multi port.

Reach M+ will absolute isolate to flight controler.
How I connect hotshoe? Just plug the Time mark pin on a center pin at hot shoe and GND pin to GND plate on Hot shoe? Or do I need to plug with the resistor as on picture?

Hi Michal,

You need to connect:

  1. Reach M+ Time mark pin to hot shoe center pin;
  2. Reach GND pin to hot shoe GND plate.

You can also use Hot shoe adapter from our online store.

thank you for confirmation

1 Like