Im running Reachview 2.2.7 in Single mode, on Reach and on ReachRS
Most of the time, on the status page, the sdn sde sdu values are always ±0.000 m
while the LLH position log shows the values:
1944 137950 52.394963592 4.897886310 30.5201 5 5 38.7189 15.1250 36.5546 22.7516 22.2389 37.2632 0.00 0.0 1944 137951 52.394996945 4.897911882 33.4656 5 6 21.4897 8.3908 20.8893 10.5981 10.8191 20.5518 0.00 0.0 1944 137952 52.394997939 4.897920048 33.0765 5 6 21.4912 8.3904 20.8912 10.5980 10.8188 20.5536 0.00 0.0
Similarly, the LLh TCP stream works
in static mode, with correction input, I do get the sd values displayed!