No s.port telemetry out to FrsSky Receiver OpenTX

[iriol]

using latest emlid image with Navio2 and FrSky RX6R receiver and cant get any telemetry out via s.port to work with the yapuu telemetry script with converter cable…have tried USB (with UsB/TTL adapter) and straight out from AMAC01 serial and no luck
the setup works fine with a pixhawk4, but Navio2 no luck…I saw another thread around here about recompiling a new AC version with a difference .cpp file…is that the solution?

link is here

Passthrough FrSky telemetry not working on RP3/Navio2

Hello, I’m using successfully the native passthrough FrSky telemetry on Pixhawk, Pixhack and PixRacer with my Taranis X9E and the great C&T (Craft and Theory) FlightDeck script and I would love to use it on my Navio2, unfortunately it does not work when the telemetry cable is connected to the Navio2 UART port. Here is my setup: Raspberry Pi 3, Navio 2, X9E, X8R, SmartPort telemetry cable AC-3.5.0-rc2, MP 1.3.45, OpentTX 2.2.0-rc9, FlightDeck 3.0.5 SERIAL1_PROTOCOL set to 10 (FrSky SPort P…

[tatiana.andreeva]

Hi @iriol,

At the moment, the passthrough feature is not supported on Navio2. You can check my answer from here for more details:

Passthrough FrSky telemetry not working on RP3/Navio2

Hi Gabriel, Sorry for the delayed response! It’s possible to obtain the flight data such as GPS location in GCS software. However, the passthrough feature that allows getting the same data directly on the RC transmitter is not supported on Edge out of the box. Still, Edge can be used with FrSky telemetry in the standard mode. You can connect the RC receiver directly to the RC input port marked as R on the servo rail. Check the pinout in Edge docs.