I think we both have same issue: I’m also getting 1004 messages and no fix so far…
Have you got any feedback about this or even found a way to get a fix?
I’m trying to have a working setup with a single Reach RTK configured as rover getting NTRIP corrections.
“So far so bad” never experienced a Fix neither a Float solution.
Reach stuck in Single and I’m suspecting there’s some incompatibility with the caster I’m getting corrections from.
Some picture of my setup:
[image]
and ReachView configuration
[image]
[image]
Firmware image and ReachView version are up-to date (just re-flashed and updated reachview to 2.9.3)