Hello,
The new ILX-LR1 camera for Sony drones comes with an output terminal that records the photo trigger. This system is different from the traditional hotshoe that connects to C1.
Is it sufficient to directly connect the GND line to GND and the Sony GPIO output to the Time Mark pin of C1?
1 Like
Hi Pedro,
Welcome to the forum!
We haven’t tested this setup with this output terminal, so I can hardly comment on it. However, I think it can work. Here’s a link to the M2 pinout. And yes, you would need to connect the M2 GND pin from the C1 port to the camera’s GND and the M2 Time mark1 pin from the C1 port to the camera’s pin that provides the shutter signal.
1 Like
This topic was automatically closed 100 days after the last reply. New replies are no longer allowed.