Navio2 How to start?

Hi again,

Yesterday, I started to configure a Navio2 on a Rasp3. I install the Navio-Raspbian image and I don’t know what’s next. Can you give me some advices?

I also install “sudo apt-get install xserver-xorg xinit xserver-xorg-video-fbdev lxde lxde-common” and now when i start the rasp the screen is black.

I used the Navio for a hexacopter.

Hi, Navio2 is intended to be controlled over a console e.g. SSH.

First thing to do is to setup a network connection such as Wi-Fi, instruction are here.
Then, proceed to the APM installation.