The webpage images makes you think they are larger…but yes, smaller is better, especially when lugging around or traveling. Good job Emlid.
@tatiana.andreeva, If I backorder right now what is the expected time frame? I need a set for a new superintendent and need to decide which direction I am going to go. Thanks!
Reach RS2 is in stock now! I believe it should also be available from your local dealer
@agrimgalina mine as well. Great Emlid!
Today Argentina suffered a great monetary devaluation and the import costs are going to be very high, so it was my hurry to receive it, I hope to get it out of customs
3 posts were merged into an existing topic: “Show your New Reach RS2” Thread
I just received mine, is there a “show your new RS2” thread?
You can post your feedback here!
We now started a separate topic where you can post your RS2 pictures:
If you have some great photos, also remember this one: https://emlid.com/photo-contest-2019/
A post was merged into an existing topic: “Show your New Reach RS2” Thread
We’ve decided to start a separate thread where you can share your unpacking and first-time setup experience with Reach RS2:
Are the NMEA messages the same from RS+ and RS2? Any additional messages?
The messages should be the same
hi there, i am looking to buy RS2 in Greece.
My concern is that the frequencies the greek providers use are the following:
900 (E-GSM) GSM
1800 (DCS) GSM
B1 (2100) UMTS
B3 (1800 +) LTE
B7 (2600) LTE
B20 (800 DD) LTE
Will I only have 2g available with RS2? Is there a 4g modem upgrade planed for the near future?
You shouldn`t have any issue with 2G. It has been tried with all kinds of different setup without any lag or difficulties in my area with 2G and 4G only. Even with lower 2G coverage the RS2 performs flawlessly.
Do you know if I could provide the data needed to RS2 for ntrip through wi fi? For example if I turn the android device I am using with Reachview into a wi fi hot-spot.
Yes, that is one of the intended uses for Reach devices. They are all happy to connect to a hotspot and then to an NTRIP server for corrections or to the tile server to get the Reachview basemap layer, or to Emlid to update software, etc.
2 posts were split to a new topic: Reach RS2 continuous use