Motor run on start after changing from Copter to Plane

Navio / Edge Flight stack
1

Good day.

I changed my setup from Copter to Plane 3.8. Disabled copter and now when ever I start my Navio 2 the motors will start and run at full speed the moment the Navio 2 boots up.

2

Hi there!

Could you please share a screenshot of sudo emlidtool ardupilot and the sudo emlidtool with ArduPilot stopped?

3

I am going to flash the SD card and see if this happens again. If it happens I will post :slight_smile:

4

This topic was automatically closed after 100 days. New replies are no longer allowed.