I used static mode for LLH and NAVI solution.
Here the parameters used: (the oriniginal extention is .conf, I renamed to .pos and erased my username/passwords from RBMC-IP system to upload here)
PARAMETROS_RTK_COMPARA_ANTENAS.pos (7.3 KB)
The results shows a low compatibility with the specs - the study was to verify the capability of the M2 to obtain RTK solution. The best solution is with PPK.
The reason why I repeated 7 times the test with each antenna/base: eliminate the efect of satelite geometry, getting an averange data.
The environment was not too good for ‘best performance’ of position quality - but it inpact both solutions (LLH and NAVI), once the data is the same for both.
Here a photo of the spot (on a window sill of my house)
