I thought i share a old survey job i did on one of our contruction sites.
Gear i used:
1x Reach in one of mye DIY survey poles
1x Phone with hotspot, lefebure ntrip, autocad360 and connection to internet
1x CPOS ntrip, provider of correction data (VRS base)
1x worksheet with predefined points to survey, and some to collect and adjust
From the video below i started out in the terrain over a fixed offical known point to geo ref. autocad360.
I then stared walking towards the site area to do several tasks like, stake out new points, survey old ones and measure over other controll points.
Video shows a log thats been post processed for the audience.
This is old data, not sure what reachview version i used. Anyways, hope you enioy it.