Is it realy plausible to use 3g dongle with ReachRTK?

[panky (Benedikt)]

your dongle should support hilink (ppp not needed), otherwise you might think about flashing a hilink fw to your dongle
maybe this post helps:

Connection Huawei Mobile Stick to Reach

Hi, i now can connect my Reach to the Internet via a Huawei 3G UMTS Dongle. I had a lot of trouble doing this, so I want to give you some advice how I have done it. I use a Huawei e3531 UMTS Donge with HiLink. The first Problem was switching the Stick from CD-Rom Device to Ethernet Device. In normal Linux Distributs this is done by usb_modeswitch, but this tool is not installed on Reach. So I used the Driver deliverd on the Dongle (Read out by a PC because the Reach can not read from the CD…