Integration of m2 with share 102 PSDK oblique camera

Reach Module / M+ / M2 Hardware integration
1

Hello guys,

We have bought a oblique camera from company called share and camera model is share 102 PSDK.

We have facing difficultly in integration of m2 with the camera

3

Hi Vikash,

Welcome to our community!

We haven’t tested the integration with this particular camera, so I can hardly provide straightforward steps for the setup. But I can recommend trying the following:

  • Connect the GND pin from Reach M2’s C1 port to the camera’s GND.
  • Connect the Time mark 1 pin from Reach M2’s C1 port to the camera’s pin that provides the shutter signal.

You’ll need to use a custom cable for that. Here’s the connector pinout of Reach M2 as a reference.

Please feel free to share any experience with the integration!

1 Like
4

Hi kornel

We will follow the same steps and update you asap.

Thanks

1 Like