I had an issue on my emlid RS3 showing a IMU error. I was operating it around -20C and I suspect that the IMU wasn’t working correctly due tot he cold.
I tried to disable the IMU correction on the survey settings in Emlid Flow but still wasn’t allowed to record a waypoint. Is there a workaround in the case the IMU strikes again?
1 Like
Hi Achille,
Welcome to the community!
Can you please generate a full system report after reproducing this behaviour? I’d like to look into it to investigate the issue. As the report may contain sensitive information, feel free to email it to support@emlid.com. Please also include a screenshot of the error message you see. Thanks!
2 Likes
I will do that if the error comes up again.
2 Likes