I need help building my first drone

Hi Emlid Community,

I am Hari, and I need help with building my first drone. I did some ooking online. Will this kit (https://www.amazon.com/Qwinout-Frame-Quadcopter-4-Axle-Unassembly/dp/B01N462QMX/ref=pd_sbs_21_6?_encoding=UTF8&pd_rd_i=B01N462QMX&pd_rd_r=ZYT9EG7KH0RC8KGDJJC7&pd_rd_w=YeMJm&pd_rd_wg=Ti8N3&psc=1&refRID=ZYT9EG7KH0RC8KGDJJC7) be enough to help me out with building my drone? I also need advice on the telemetry, and how to connect it.

I would be very grateful for y’alls help.

Have you bought your Emlid Ap yet and if so which one?

If by Emlid Ap you mean the Navio or reach Series, I have a raspberry pi 3 model b and will be ordering the Navio2.

If by Emlid Ap you mean the Navio2, then yes. This is my shopping list:

https://www.amazon.com/gp/product/B010Q5QSHC/ref=ox_sc_act_title_10?smid=A36AZVMIXMN0IJ&psc=1 (Motors)

https://www.amazon.com/gp/product/B00UL4CYD6/ref=ox_sc_act_title_9?smid=A37EFSP4QP9HL5&psc=1 (ESC)

https://www.amazon.com/gp/product/B01C8C9YLS/ref=ox_sc_act_title_8?smid=A1B3N72XIXC3UJ&psc=1(Navio2 kit)

https://www.amazon.com/gp/product/B00DG0LEZG/ref=ox_sc_act_title_7?smid=ATVPDKIKX0DER&psc=1 (Zip ties)

https://www.amazon.com/gp/product/B01D4MKZJQ/ref=ox_sc_act_title_6?smid=A1PF2I8RIXF6UO&psc=1 (GPS mount)

https://www.amazon.com/gp/product/B0776WLHX7/ref=ox_sc_act_title_5?smid=A2U3BMERFH1POA&psc=1 (Drone Frame)

https://www.amazon.com/gp/product/B003Y6E6IE/ref=ox_sc_act_title_4?smid=AQ27RX5YWT4X8&psc=1 Buzzer


(Battery Charger)


(Transmitter and Receiver)

https://www.amazon.com/gp/product/B00MN69I0C/ref=ox_sc_act_title_1?smid=AM8UWXBKQ70BE&psc=1 (3000 mah 3s LiPo battery)


(Soldering Station)

Great now have you read the Navio2 documentation

This topic was automatically closed 100 days after the last reply. New replies are no longer allowed.