GPS 2 Not found RTK issues Emlid M2

Thanks for the system report. I’ve had a look and didn’t spot anything unusual with the M2 itself. It seems to be working fine on the hardware side.

As far as I know, a 3D GPS FIX and an RTK FIX aren’t the same in Mission Planner. I also came across this thread. RTK FIX refers specifically to a fixed RTK solution that uses corrections, while a 3D GPS FIX just means the unit has enough satellites to get a position.

When you see Single in the Status bar of Emlid Flow, it means the M2 is not receiving corrections yet. Once corrections are coming in, this should switch to Float or Fix, depending on the accuracy level. In Mission Planner, do you see any green bars that indicate the laptop is receiving corrections?

You’ve already tried connecting the M2 to the internet and setting the Corrections input to your NTRIP service instead of Serial, right? In that setup, what solution status did you get? If it were Float or Fix, then it’s likely the issue is on the autopilot or Mission Planner side.