GPIO Pins for Navio 2?


We would like to hook up a small sensor to the RPI on which the Navio2 is running. We need GPIO pins to do this. Do you know if there is a way to get access to the GPIO pins on the RPI? Or is there some way to use the pins on the servo-rail as GPIO pins for the RPI?

Take a look at the pinout. GPIO17 and GPIO18 are available on the UART port.

HI ,

Are these GPIOS available if I have the reach module connected to it?
Do the reach modules use these GPIOs?

@esa.attia Reach module does not use these GPIOs, only UART in the port.

1 Like