Also very interested in the local NTRIP caster directly from the RS2 specifically for use with our DJI P4RTK.
Ciao Julia,
Puoi anticiparci qualche novità? Manca molto?
it becomes very long since we ve start this topic… this feature is very important for most of us, several hundred / thousand users are waiting this feature… and the only information we have is : “still working on this feature”… how long time do we need to wait anymore?
it seems this feature wont be release ever.
Give us real news please
Hi,
We have a roadmap and a release schedule. Sometimes, when we see high demand, we fit unplanned features into this schedule.
Even a well-planned feature takes time to implement and passes many stages before the release. Unplanned cases require even more consideration.
We are always frank with you. If we decide not to implement the feature, we’ll come to you with an explanation.
However, when the feature is released, we’ll tell you as well.
4 Likes
I am glad this is still being worked on as I am experiencing more demand for this feature and can’t wait to be able to fully utilise the rs2
1 Like
Hi there,
The news you’ve been waiting for! ReachView 3 6.14 with a local NTRIP caster feature is just released 
Please make sure your devices are on the latest firmware version as well.
11 Likes
Good new !!! amazing team !!
Question:
Is it possible to do both at same time :
- Casting a local NTRIP for the drone
- Correcting a second RS2 by LORA
Thanks !!!
Excellent news! Emlid dev team and their customer support/forum team, you guys are great, thanks for listening to your customers
6 Likes
Вы все больны!
8 Likes
Could you explain or instructions how to use this feature?
Thanks and great job
Michael, I think I got what you meant to say, and thank you! But literally, it translates as “You have a severe illness” 
11 Likes
haha…He’s using modern slang to pay you a compliment! But Google translate is not perfect.
1 Like
Yeah, I like this slang too!
2 Likes
Ill like a Beastie Boy.
4 Likes
Not 192.168.42.1?
Thumbs up for the release. I have 2 questions.
- Is it mandatory to connect the base (rs2 or m2) to some wifi network so that the rover must be in the same network or does the feature work when the base is in hotspot mode? For example the base is in hotspot mode, then the rover connects to the reach wifi hotspot and receives the corrections via ntrip. Is it possible?
- What is the range of the wifi hotpsot of the RS2 or M2? Is it 50m?
No, only one Correction output channel can be used at a time.
If Reach is in hotspot mode, the IP address will be 192.168.42.1. This feature is available within any Wi-Fi network, not only in Reach’s hotspot network.