Facing problem in connecting my drone over the internet please help!

Navio / Edge Getting started
1

i am currently facing problem in connecting to the ground station over the internet .
i was trying to connect my mission planner on my pc connected to a wifi whose public ip[ address i knew. whereas on my drone where i am using raspberry pi 3 as an onboard computer and onbord wifi
using the following command -
mavproxy.py --master=/dev/ttyAMA0 --baudrate 57600 --out 192.168.137.1:14550 --aircraft MyCopter
i was transmitting the data to my ground station.the rpi3 is connected to a seprate and and different wifi also instead of 192.168…i used the public ip address of the computer at the GSC.
the mission planner is not connecting to the rpi3 through this…please help!!

3

Hi @prayagsharma.777.ps,

What’s the Raspbian release you use?

4

I am using raspbian strecth
Version : November 2018
Kernel version : 4.14

5

I answered to your other thread at ardupilot.org.

6

Yes thanks alot for helping!

8

This topic was automatically closed 100 days after the last reply. New replies are no longer allowed.