External UHF reciever Setup on RS2

[DetritalGeo (Matt Bodnar)]

Reach RS2 and External radio modem via Bluetooth

I feel like you are correct. The XDL radio doesn’t use any pairing security (pin code), it simply connects when prompted. I don’t typically interface with the XDL via BT as the GNSS I normally use with it doesn’t support BT. This was just something I wanted to try to see if I could go wireless with the RS2. I will try and play with this a bit more but I don’t have a ton of time to dedicate to it. @dmitriy.ershov do you have any suggested settings to change on the XDL? All I can really change is…

It would be great if there was a way to pair the Bluetooth XDL Rover with the RS2 and feed UHF corrections that way.

Incidentally, I decided to try my Trimble TDL-450 radio instead and is working fine as a reciever or the transmitter so there must be some settings in the XDL to adjust.