Emlid Raspbian OS no booting on RPI 4 2GB

Hi Mike,

Navio2 requires RCIO code which is not an open-source code, so it’s hardly possible to do that manually.

Our devs team is currently looking into what might be the best solution here. It requires some time as there are a lot of aspects that we need to check to understand what went wrong. Surely, when there’s any update, I’ll let you know!

approximately when will it be ready?

Hi Mike,

The work on the issue is still in progress. I can hardly give any approximate dates, but I’ll let you know if there’s any news.

2 posts were merged into an existing topic: Image problem

Hi, any news, when will be ready stable version ? :slightly_smiling_face:

Hi Mike,

We’re in the testing stage at the moment. Once I’ve any updates, I’ll let you know.

By the way, one of the users finds a workaround of how to eliminate this issue. You can check this post. I’m not sure whether it works all the time, but you may try it if you want.

Hi Mike,

I’m back with some news for you!

We’ve just released the image that should make your RPi 4 boot correctly now. You need to reflash your SD card with the image from our guide to get this fix. Please let me know how it works.

Hi Liudmila.

I have a problem again. Does not connect to WiFi. I have no Ethernet and Mini HDMI cables, only Wi -fi. I tried as in the instructions, it does not work in any way. Another OS working.

Can you please test it ? Connect to wifi via wpa_supplicant…

I think OS no booting again. Do you test it on RPi 4 rev 1.5 ?

Or problem is a wifi driver or… dhcp service

Hi Mike,

In terms of connection to the Wi-Fi network, there were no changes. It should work fine. How do you configure your wpa_supplicant.conf file?

country=am
update_config=1
ctrl_interface=/var/run/wpa_supplicant

network={
ssid=“mmmmm”
psk=“mikemike000”
key_mgmt=WPA-PSK
}

This working on raspberry pi buster lite os. Maybe timezone is a problem?

Can you please test it on rpi 4 rev 1.5?

And file var/log/lastlog is empty and all log files are empty

Please comment the key_mgmt parameter, save the file and try to connect once again.

Not working

Hi Mike,

Have you tried connecting it to another Wi-Fi network? For example, your mobile phone hotspot.

Hi. Yes, it’s again not working.