@tatiana.andreeva
After a number of bad tests i decided to burn IMG by etcher. Try was successful. I reboot FC and connect with GCS. Still bad log message. i dissable logging from arming checks only to find that on my 2 arms it gave me 2 logs (not this is driving me crazy) Also from picture below you will see the message i got on GCS, as also you will find the dmesg file when i tried to download the 1mb log and it gave me ERROR message. Not timeout this time.
Log Download.zip (8.2 KB)
Edit: I just reboot again. with Arming check closed for logs. i still get message but for now i can find log files. dates are wrong due to bad GPS signal at the moment. Still download is a problem and same putty dmesg
[ 10.722413] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 11.367317] uart-pl011 3f201000.serial: no DMA platform data
[ 11.372264] rcio spi1.0: rcio_pwm: requested update on 3 to 50
[ 11.372380] rcio spi1.0: rcio_pwm: requested update on 3 to 50
[ 11.372444] rcio spi1.0: rcio_pwm: requested update on 3 to 50
[ 11.378854] rcio spi1.0: rcio_pwm: updated freq on grp 3 to 50
[ 12.388221] rcio spi1.0: rcio_pwm: requested update on 0 to 490
[ 12.388298] rcio spi1.0: rcio_pwm: requested update on 0 to 490
[ 12.388362] rcio spi1.0: rcio_pwm: requested update on 0 to 490
[ 12.388423] rcio spi1.0: rcio_pwm: requested update on 0 to 490
[ 12.388485] rcio spi1.0: rcio_pwm: requested update on 1 to 490
[ 12.388547] rcio spi1.0: rcio_pwm: requested update on 1 to 490
[ 12.388608] rcio spi1.0: rcio_pwm: requested update on 1 to 490
[ 12.388669] rcio spi1.0: rcio_pwm: requested update on 1 to 490
[ 12.391947] rcio spi1.0: rcio_pwm: updated freq on grp 0 to 490
[ 12.394143] rcio spi1.0: rcio_pwm: updated freq on grp 1 to 490
[ 12.411750] rcio spi1.0: rcio_pwm: requested update on 3 to 490
[ 12.411820] rcio spi1.0: rcio_pwm: requested update on 3 to 490
[ 12.411884] rcio spi1.0: rcio_pwm: requested update on 3 to 490
[ 12.417963] rcio spi1.0: rcio_pwm: updated freq on grp 3 to 490
[ 16.313754] RTL871X: set group key camid:1, addr:00:00:00:00:00:00, kid:1, ty pe:TKIP
[ 16.314115] RTL871X: send eapol packet
[ 16.414376] RTL871X: send eapol packet
[ 17.415591] RTL871X: send eapol packet
[ 17.811632] RTL871X: recv eapol packet
[ 17.812213] RTL871X: send eapol packet
[ 17.813355] RTL871X: recv eapol packet
[ 17.813937] RTL871X: send eapol packet
[ 17.814871] RTL871X: recv eapol packet
[ 17.914437] RTL871X: send eapol packet
[ 18.915040] RTL871X: send eapol packet
[ 19.915675] RTL871X: send eapol packet
[ 21.312933] RTL871X: OnDisassoc(wlan0) reason=8, ta=00:c0:ca:96:14:7e
[ 25.836257] RTL871X: send eapol packet
[ 25.840145] RTL871X: recv eapol packet
[ 25.840636] RTL871X: send eapol packet
[ 25.845287] RTL871X: recv eapol packet
[ 25.845857] RTL871X: set pairwise key camid:4, addr:00:c0:ca:96:14:7e, kid:0, type:TKIP
[ 25.846611] RTL871X: send eapol packet
[ 25.850501] RTL871X: recv eapol packet
And here is the log that was created that now has almost no information for now on why if i have log on arming check it created nothing, but if i have it disabled it creates logs…STRANGE. https://plot.dron.ee/zW2e