Edge with Reach M+ not receiving correction (not fixed solution)

[Gabriel_Galindo]

Hello guys,

I’m trying to use edge with Qground, M+ receiver (Rover), and a Reach RS base to get correction via WiFi thru the wifi modules that come with the edge module as is shown in the edge tutorial for reach m+ integration but. I configured correctly everything but I don’t get any correction.

[dmitriy.ershov]

Hi Gabriel,

Welcome to the forum!

Please provide us with the following information

1. Image and ArduPilot version.
2. Detailed problem description. How does observed behavior differ from the expected one?
3. Your step by step actions.
4. Picture of the setup and connection scheme.
5. If using any additional hardware please provide exact make and model.

[andrew.yushkevich]

Hi @Gabriel_Galindo,

Can I ask you to share the following info from Dmitriy message?

@dmitriy.ershov

Please provide us with the following information

1. Image and ArduPilot version.
2. Detailed problem description. How does observed behavior differ from the expected one?
3. Your step by step actions.
4. Picture of the setup and connection scheme.
5. If using any additional hardware please provide exact make and model.

If you’ve already resolved this issue, please, let me know about that.

Thanks.

[Gabriel_Galindo]

Sorry I don’t have the equipment right now, but I’ll send the pictures tomorrow. An apology.

[andrew.yushkevich]

Hi @Gabriel_Galindo,

How’s your setup going?