EDGE video stream without QGC

Hi @rcdevil,

May I ask you to describe your problem in this thread, so we can help you out? Also, it would be useful for other users who might face the same issue.

Dear Svetlana,

i wanna access the videostream without QGround Control and i need a exact description how this can be maked.
At first i had installed the gstreamer for windows.
My OS is Win 10 professional.
Step 2: i opened the command in windows and pasted this:
gst-launch-1.0 -v udpsrc port=5600 caps=“application/x-rtp, media=(string)video, clock-rate=(int)90000, encoding-name=(string)H264” ! rtph264depay ! avdec_h264 ! videoconvert ! autovideosink sync=f

But here i get an error message.
Maybe i understood something wrong.
Where and how exactly i must type this command?
Thank you very much!

I have now managed to get into the terminal via SSH.
Then I entered the command:
gst-launch-1.0 -v udpsrc port = 5600 caps = “application / x-rtp, media = (string) video, clock-rate = (int) 90000, encoding-name = (string) H264”! rtph264depay! avdec_h264! video converter! autovideosink sync = f

Then unfortunately an error message appears, see screenshot.
What am I doing wrong?
How can i access the video stream in example with VLC media player.
It would be better if EMLID can post an simple step by step instruction.
Thank you advance!

Dear Gleb, that is what i have reached, see the screenshot.
How i must proceed further?
Thank you very much.

Hi @rcdevil,

Sorry for the delay!

Based on the screenshot, you entered the following command in the EDGE console:

gst-launch-1.0 -v udpsrc port=9000 caps="application/x-rtp, media=(string)video, clock-rate=(int)90000, encoding-name=(string)H264" ! rtph264depay ! avdec_h264 ! videoconvert ! autovideosink sync=f

However, you need to execute it in your Windows terminal.

1 Like

thank you, but can you explain, not only for me, for the community, a short complete description about the procedure for this? From A to B?
Regards

Hi @rcdevil,

We described all the process in this guide in our docs. However, if it’s not so clear at some stages, please, let us know so that we can make it better.

Thank you!

What about the ardupilot update on edge.
I spent $ 1200 two months ago and it turns out that I can’t update ardupilot.
Too bad for emild, I was deeply disappointed.
I doubt he will trust Emil again.

Juan,
We keep supporting Edge and we would love to help you get it to work. Please let us know if you need any assistance.

I want to update ArduCopter V4.0.3.

Hi @juan_jose_casto,

We have a guide in our docs on how to built and run Ardupilot on the Edge. However, you can download a ready binary file with the Ardupilot version for Edge and go through only How to run section.

Please, could you clarify whether you use Windows, Mac or Linux so that I can provide you with a step-by-step guide?

I use windows 10. I want to update my edge to ardupilot 4.0.3.
Thanks and sorry for my bad English.

Hi @juan_jose_casto,

We’ve tried to run ArduPilot 4.0.1 binary on Edge. It seems that the latest ArduPilot versions require a new version of the GLIBC library, so it should be updated on Edge. We’re looking into how we can fix it right now and will get back with any updates as soon as possible.

Thank you. I look forward to this update.

Hi @juan_jose_casto,

We’ve accomplished several tests and figured out that the best way to solve this issue is to release a new Raspbian image for Edge. We are working on the update, and I’ll keep you posted about it.

Thank you

Good .
How is it going.
We will have a solution soon.
Cheers

Hi @juan_jose_casto,

We’re still working on a new image. I’ll get back to you as soon as there is any news!

Thank you very much for your attention and work.
Cheers

This topic was automatically closed 100 days after the last reply. New replies are no longer allowed.